Heat Pressure Tester

Aplikasi: 
Untuk menguji  tekanan pada pin isolasi tusuk kontak pada suhu 200 ° C dengan beban 2.5N.
Alat ini memiliki pisau persegi panjang (lihat IEC 60884-1 Figure 41A) dengan tepi ketajaman pisau 0,7 mm digunakan untuk tusuk kontak dengan pin bulat, atau pisau yang memiliki bentuk bulat (lihat gambar 41b), dengan diameter 6 mm dan tepi (0,7 ± 0,01) mm,  

Model	: HPT-02
Suplai daya	: -
Kategori	: Alat uji tusuk kontak
Dimensi(mm)	: 150 x 250 x 300
Berat (Kg)	: 5  Kg
Produk/sample uji	: Tusuk Kontak, Steker
Sesuai standar	: SNI IEC IEC 60884-1 Figure 41, BS1363.

Read More

Conductor Damage Checker

Aplikasi:
- memeriksa tingkat kerusakan kawat konduktor kabel
- menilai apakah desain dan struktur dari terminal klem sekrup dapat merusak kawat konduktor kabel
- memeriksa apakah terminal klem sekrup tahan stres/tarikan selama proses penggunaan normal.

---

Spesifikasi:

Model Dimensi Sumber Daya Platen Diameter Circular Radial/Diameter (mm) Kecepatan Putaran Periode Lama Uji Jarak Platen dengan Terminal(H)(mm) Load Beban(Kg) Conductor Sample Test Sesuai Standar

: CDC-A11 : 600x600x950 : AC 220V, 50 HZ : 75mm : 37.5/75 : (10 ± 2) rpm : Approximately 15 minute : 260 & 280 (± 15) : 0.3, 0.4, 0.7, 0.9, 1.4, 2.0 : 75mm longer than H : SNI IEC 60884-1 Gambar 11

Read More

Tumbling Barrel Test Apparatus

Aplikasi: Alat uji yang berfungsi untuk mensimulasikan kondisi jatuh berulang suatu part kecil atau komponen seperti steker/plug, dll. Model: CPL-TB Sumber daya: AC220V, 50Hz Dimensi(mm): 650X650X1000 Ketinggian jatuh untuk sample:  500 mm Bidang permukaan jatuh: 20 mm kayu blackwood/plywood Kecepatan berputar: 5 rotasi/menit Jumlah jatuh:  10x jatuh/minute Produk/sampel uji: Steker, Plug, Soket, Komponen kecil,dll. Sesuai standar: SNI IEC 60884-1,SNI IEC 60068-2-31

 Alat Uji Tusuk Kontak

Read More

Heat resistance tester

Aplikasi:
Untuk menguji ketahana isolasi pin terhadap panas yang tidak normal.

Model	: PS-003
Suplai daya	: AC 220V, 50Hz
Kategori	: Alat uji tusuk kontak
Dimensi(mm)	: 400 x 400 x 400
Berat (Kg)	: 20 ~ 25 Kg
Produk/sample uji	: Pin isolasi, steker, plug, dll
Sesuai standar	: SNI IEC 60884-1 gambar 40

---

Order
To determine testing resistance to abnormal heat of insulating sleeves of plug pins, in according to IEC 60884-1 figure 40, This test apparatus consists of an insulating plate A and of a metal part B: between these two parts an air space of 3 mm shall be provided and this distance shall be obtained through means which do not impair the air circulation around the pins.

Standard Outfit:

• 1 insulating plate A, which round and flat, thick 5 mm, have a diameter equal to twice the maximum permissible dimension of the engagement face of the plug given in the relevant standard sheet, 
• 5 metal part B, brass, length at least 20 mm, the same shape as the maximum outline of the plug according to the relevant standard sheet, 
• 1 thermocouple, type K, is inserted at a distance of 7 mm from the front surface of the metal part B in a symmetrical position 
• Insulation board : 5 mm thick round flat surface, diameter twice test diameter surface of the product. 
• Metal part B (Fixture): length of more than 20 mm, Material Brass, five pieces, can be replaced. 
• Gap between the boards of insulation and metal B : 3 mm, 
• The distance between the metal thermocouples & B: 7 mm 
• Metal bolt hole B : more than 0.1 mm

---

Read More

Encourage torque device

Aplikasi:
Untuk menguji ketahanan terhadap torsi dari sebuah peralatan listrik yang terdapat kabel fleksibel dengan diameter sampai dengan 10 mm yang tidak dapat dikawati ulang.

Model	:
Suplai daya	: -
Kategori	: Kabel, plug & soket
Dimensi(mm)	: 630 x 120 x 180
Berat (Kg)	: 8 ~ 14 Kg
Produk/sample uji	: Kabel fleksibel
Sesuai standar	: SNI IEC60884-1 klausul 23.2 ( table 18),   SNI IEC60335-1 klausul 25.15. (table 12 )

Read More

Stroke Durability Tester

Aplikasi: 
Menguji kekuatan pasangan steker & soket (Plug & socket outlet) dari kerusakan dalam penggunaan yang normal.

---

It can provide the test of breaking volume of socket and outlet, and mechanical action of normal operation lifespan. Using pneumatic unit as motive power, power-on time and intermittent time can be adjusted.

Model : SDT-02
Power Supply : 220V 50Hz
Dimensi(mm) : 600 x 400 x 500
Berat (Kg) : 45 ~ 50Kg
Air source : 5 ~ 8 kg/cm2
Working station : 2 Station
Terminal Type : 2 pins & 3 Pins
Counter Display : 6 Digit
Sesuai standar : SNI IEC 60884-1 Figure 16  & Clause 20

Read More

Pin Abrasion Tester-02

Aplikasi:
Untuk menentukan ketahanan abrasi isolasi dari sebuah pin konektor.

---

Plug pin abrasion. to determine the abrasion resistance of insulating sleeves of plug pins by moving backwards and forwards, according to SNI IEC 60884-1 Figure 28.
The test apparatus comprises a horizontally disposed beam, which is pivoted about its center point. A short length of steel wire, 1 mm in diameter and bent into a U-shape, the base of the U being straight, is rigidly attached, at both ends, to one end of the beam, so that the straight part projects below the beam and is parallel to the axis of the beam pivot.

The plug is held by a suitable clamp in such a position that the straight part of the steel wire rests on the plug pin, perpendicular to it. The pin slopes downwards at an angle of 10° To the horizontal.
The beam is loaded so that the wire exerts a force of 4 N on the pin.

• Model : PAT-02
• Power Supply : 220V 50Hz
• Counter Display : 6 Digit
• Tingkat abrading : 30 ± 1 gerakan per menit
• Beban: 4-0.1N
• Gerak maju mundur menggores: 7 – 9 mm
• Counter Digit : 6 Digit
• Sudut pin  sampel : 10°
• Radius pin baja: 0,25 mm ± 0,02 mm
• Kecepatan menggores : 20 mm/s ± 5 mm/s
• Sesuai Standar : SNI IEC60884-1 Figure 28

---

Read More

Pin abrasion tester-01

Aplikasi:
Untuk menentukan ketahanan abrasi pin isolasi steker/plug dengan cara mensimulasikn gerakan mengkikis terhadap pin isolasi sampel uji.

---

Plug pin abrasion. to determine the abrasion resistance of insulating sleeves of plug pins by moving backwards and forwards, according to SNI IEC 60884-1 Figure 28.
The test apparatus comprises a horizontally disposed beam, which is pivoted about its center point. A short length of steel wire, 1 mm in diameter and bent into a U-shape, the base of the U being straight, is rigidly attached, at both ends, to one end of the beam, so that the straight part projects below the beam and is parallel to the axis of the beam pivot.

The plug is held by a suitable clamp in such a position that the straight part of the steel wire rests on the plug pin, perpendicular to it. The pin slopes downwards at an angle of 10° To the horizontal.
The beam is loaded so that the wire exerts a force of 4 N on the pin.
Spesifikasi:

• Model : PAT-01
• Power Supply : 220V 50Hz
• Dimensi(mm) : 500 x 350 x 350
• Berat (Kg) : 20~30 Kg
• Counter Display : 6 Digit
• Tingkat abrading : 30 ± 1 gerakan per menit
• Beban: 4-0.1N
• Gerak maju mundur mengkikis: 7 – 9 mm
• Counter Digit : 6 Digit
• Sudut pin  sampel : 10°
• Radius pin baja: 0,25 mm ± 0,02 mm
• Kecepatan mengkikis: 20 mm/s ± 5 mm/s
• Sesuai Standar : SNI IEC60884-1 Figure 28

Read More

Enchorage Torque Balance

Aplikasi:
Untuk mengukur dan menguji ketegangan torsi yang diberikan oleh peralatan listrik seperti plug/steker. Dilengkapi dengan socket-outlet sebagai pin konektor. sesuai dengan IEC60065 klausul 15.4.1 dan angka 11, IEC60335-1 klausul 22.3, IEC60884-1 ayat 14.23.2.

ORDER SEKARANG

Model	: DCT-043
Suplai daya	: -
Kategori	: Plug & Soker
Dimensi(mm)	:
Berat (Kg)	: 6 ~ 0 Kg
Produk/sample uji	:
Sesuai standar	: IEC60884-1 klausul 14.23.2,   IEC60335-1 klausul 22.3,   IEC60065 klausul 15.4.1

Read More