Switch and Rotary Life Test

Aplikasi:
Untuk menuji  kuat mekanis dan perilaku dalam penggunaan normal, untuk menghidupkan dan mematikan saklar untuk keperluan rumah tangga dan sejenis yang memiliki arus resistif beban hingga 16A

Model	: SWA-03
Suplai daya	: AC 220V, 50Hz
Kategori	: Alat uji tusuk kontak
Dimensi(mm)	: 600x600x1500
Berat (Kg)	: Approx. 63Kg
Produk/sample uji	: Switch tekan, Switch putar
Sesuai standar	: SNI IEC

Read More

Salt spray tester

Aplikasi:
- Untuk mensimulasikan efek korosif suatu peralatan jika terkena kabut garam.
- Menguji ketahanan korosi suatu produk. Biasanya pengujian dilakukan setelah permukaan material produk tesebut di plating listrik, anodizing, setelah proses pengecatan, powder coating, dll.

 Kategori  produk:
Alat uji/mesin uji untuk kabel, plug/steker & soket
Model: CPL-SST
Sumber daya: AC220V, 50Hz
Dimensi:
Sesuai standar: SNI IEC 60068-2-11, ISO 9227,SNI IEC 60068-2-52

Read More

Water jet tester

Aplikasi:
Menguji perlindungan suatu produk terhadap masuknya air dan untuk membuktikan tingkat proteksi sesuai Index Protection 5/IPX5 yaitu "Perlindungan terhadap tembakan/jet air" atau IPX6 "Perlindungan terhadap jet  air yang kuat".
Pegangan jet dilengkapi dengan pengukur tekanan(pressure gauge). Nozel mudah diganti sesuai dengan index proteksi. Bahan nozzle dan tabung terbuat dari stainless steel.



Model: WP-IP56

Kategori: Proteksi terhadap air, Alat uji umum

Sampel uji: Pompa air, Lampu mobil, dsb.
Sesuai Standar: SNI  IEC 60529 gambar/figure 6, SNI IEC 60335-1 klausul 15.1. 1,  SNI IEC 60598 gambar/figure 8.

---

for checking the protection against ingress of water to prove the degrees of protection with the second characteristic numerals 5 "Protected against water jets" or 6 "Protected against powerful water jets" 

• nozzle element with knurling,
• handle, internal diameter approx. 16 mm, handle sleeve of plastic.
• flow meter, almost independent of position.
• flow control and stop valve with handwheel to adjust the water flow, with spout for hose of nominal width 19 mm (3/4"),
• hose, nominal width 19 mm (3/4"), 5 m long, with 2 hose clamps. nozzle element and tube within the handle of stainless steel, valve nickel-plated,

Read More

Low Impact Fall Tester

Menguji ketahanan plug/steker terhadap tumbukan yang di berikan pada sampel uji. Hasil uji harus menunjukan tidak adanya kerusakan

Model: UT-001
Deimensi: 300 x 150 x 450
Sampel uji: plug/steker
Sesuai standar: SNI IEC 60884-1, gambar 27

---

The specimens are subjected to an impact test by means of an apparatus as shown in figure 27. The apparatus, positioned on a pad of sponge rubber 40 mm thick, is placed together with the specimens in a freezer at a temperature of (–15 ± 2) °C, for at least 16 h. At the end of this period, each specimen, in turn, is placed in the normal position of use as shown in figure 27, and a weight is allowed to fall from a height of 100 mm. The mass of the falling weight is (1 000 ± 2) g. After the test, the specimen shall show no damage within the meaning of this standard

---

Read More

On Off Timer

Aplikasi:
Menguji sirkuit terhadap kondisi hidup dan mati sesuai dengan interval yang telah ditentukan. kondisi hidup dan mati dapat di setting susuai dengan standar yang ditetukan.
Model : GT-S03
Sumber daya: AC220V, 50Hz
Dimensi (mm): 350 x400 x 350
Tipe produk: Alat uji/mesin uji umum
Subyek uji: Semua alat yang harus di uji terhadap kondisi hidup nati. Seperti lampu luminer, dsb.
Sesuai standar: SNI IEC 60598-1

---

Circuit for testing the thermal resistance from the die to the life cycle of the luminaire series that will lead down to the terminal voltage test.

• Input Voltage   220V, 50Hz
• Dimension  300X250X500 (millimeter)
• Weight  Approx. 15 Kg
• Digital Counter &  Timer with 4 Digit
• With buzzer for signal after the test completed
• 3 Output  terminal for connected the sample test
• Safety with emergency button to break operation

Read More

Ball impact tester

Aplikasi:

Model	:
Suplai daya	: AC 220V, 50Hz
Kategori	: Alat uji.....
Dimensi(mm)	: x x
Berat (Kg)	: 0 ~ 0 Kg
Produk/sample uji	:
Sesuai standar	: SNI IEC

Read More

Heat resistance tester

Aplikasi:
Untuk menguji ketahana isolasi pin terhadap panas yang tidak normal.

Model	: PS-003
Suplai daya	: AC 220V, 50Hz
Kategori	: Alat uji tusuk kontak
Dimensi(mm)	: 400 x 400 x 400
Berat (Kg)	: 20 ~ 25 Kg
Produk/sample uji	: Pin isolasi, steker, plug, dll
Sesuai standar	: SNI IEC 60884-1 gambar 40

---

Order
To determine testing resistance to abnormal heat of insulating sleeves of plug pins, in according to IEC 60884-1 figure 40, This test apparatus consists of an insulating plate A and of a metal part B: between these two parts an air space of 3 mm shall be provided and this distance shall be obtained through means which do not impair the air circulation around the pins.

Standard Outfit:

• 1 insulating plate A, which round and flat, thick 5 mm, have a diameter equal to twice the maximum permissible dimension of the engagement face of the plug given in the relevant standard sheet, 
• 5 metal part B, brass, length at least 20 mm, the same shape as the maximum outline of the plug according to the relevant standard sheet, 
• 1 thermocouple, type K, is inserted at a distance of 7 mm from the front surface of the metal part B in a symmetrical position 
• Insulation board : 5 mm thick round flat surface, diameter twice test diameter surface of the product. 
• Metal part B (Fixture): length of more than 20 mm, Material Brass, five pieces, can be replaced. 
• Gap between the boards of insulation and metal B : 3 mm, 
• The distance between the metal thermocouples & B: 7 mm 
• Metal bolt hole B : more than 0.1 mm

---

Read More

Encourage torque device

Aplikasi:
Untuk menguji ketahanan terhadap torsi dari sebuah peralatan listrik yang terdapat kabel fleksibel dengan diameter sampai dengan 10 mm yang tidak dapat dikawati ulang.

Model	:
Suplai daya	: -
Kategori	: Kabel, plug & soket
Dimensi(mm)	: 630 x 120 x 180
Berat (Kg)	: 8 ~ 14 Kg
Produk/sample uji	: Kabel fleksibel
Sesuai standar	: SNI IEC60884-1 klausul 23.2 ( table 18),   SNI IEC60335-1 klausul 25.15. (table 12 )

Read More

Burning Test Machine

Aplikasi: Menentukan tingkat proteksi sampel terhadap pembakaran linear/nyala api, bara api & percikan api yang dapat merusak spesimen.

Model	: FM-02
Suplai daya	: AC 220V, 50Hz
Kategori	: Flammability Tester
Dimensi(mm)	: 1100 X 600 X 800 mm
Berat (Kg)	: 75 ~ 90 Kg
Produk/sample uji	: Plastik & material lain non logam
Sesuai standar	: SNI ISO 845, ISO 9773

---

It screening procedure for comparing the relative burning behavior specimens made from plastic and other non-metallic materials, exposed to a flame ignition source of 50W or 500W nominal power. These test methods determine the linear burning rate and the after flame/afterglow times, as well as the damaged length of specimens. They are applicable to solid and cellular materials that have an apparent density of not less than 250kg/m3, determined in accordance with ISO845. Then do not apply to materials that shrink away from the applied flame without ignition; ISO9773 should be used for thin flexible materials.

• Timing device with four digit 9999X0.1s
• Automatic Carried unit device for movement of needle
• Smoke/fume exhaust Ø 113 mm incorporated in chamber
• Black painted cabinet more than 0,5 m (2.05 m )
• Gas flow regulating valve for flame height, manual adjustment
• Gas pressure regulator and safety control
• Needle burner tilt to 45° from the vertical, manual adjustment
• Ring Stand easy to grip the sample
• Preset time of testing; 5s, 10s, 20s, 30s, 60s, 120
• Lighting inside the cabinet and fan control
• Easy manual panel control with push button lamp
• Timer Display for record data time burning, time flame
• Time for temperature to increase (100° to 700°; 23,5 s)
• Combustion angle 0 , 20 , 45
• Height of flame Up to 125 mm
• Gas Supply Propane min 95% purity

---

Read More

Test wire 1mm dan Test Probe 2,5mm

Model	: IP-1 & IP 2.5
Suplai daya:	: AC 220V, 50Hz
Kategori	: Alat uji umum
Dimensi	:
Berat	: 0,2 Kg
Sampel uji	: Umum
Sesuai standar	: SNI IEC 61032 test probe D, SNI  IEC529 untuk IP4

Read More

Tracking Test Apparatus

Aplikasi:
- Untuk melakukan Comparative tracking Index (CTI)/Indeks pelacakan Perbandingan.
- Mensimulasikan pelacakan arus pada bahan isolasi padat dengan memberikan tetesan NH4Cl antara elektroda. Selama penggunaan normal bahan isolasi dapat terkena kelembaban dan kotoran, jika kotoran tersebut bersifat konduktif, dapat menyebabkan stress/tegangan dan dapat mengakibatkan bahaya kebakaran.

Model	: TRX-029
Suplai daya	: AC 220V, 50Hz
Kategori	: Flammability test
Dimensi(mm)	: 600 x 500 x 650
Berat (Kg)	: 30~50 Kg
Sample uji	:  Bahan isolasi padat
Sesuai standar	: SNI IEC 60335-1, SNI IEC 60065,SNI IEC 61029,  SNI IEC 60112, SNI IEC 61058-1, SNI  IEC 60669-1,  SNI  IEC 60884-1, SNI IEC 60950-1, SNI IEC 60598-1, IEC 60320-1, IEC 60898-1, IEC 60400, IEC 60238, IEC 60730-1, ASTM D 3638,....etc.

---

Comparative Tracking Index Test Apparatus is designed to carry out the comparative tracking index test described in IEC 60112. As per the standard, Tracking is “Progressive formation of conducting paths, which are produced on the surface and/or within a solid insulating material, due to the combined effects of electric stress and electrolytic contamination.” And Tracking Failure is “Failure of insulation due to tracking between conducting parts.”
The Comparative Tracking Index Test Apparatus provides a safe method to test insulators as per the standard. In this test, an insulator is subject to high voltage with the help of electrodes and a contaminant is dropped on the insulator between the electrodes. The comparative tracking index of the insulator is thus found out.

Spesifikasi tehnik:
Test Voltage                    : 100 to 600V AC, adjustable (Step Voltage 25VAC)
Trip Current                    : 0.5A  for 2 s
Voltage Indication            : 3 Digit Voltmeter, 0 to 600V
Current Indication           : 31/2 Digit Ammeter, 0 to 2.000A
Dropping Unit                 : Automatic by special positive displacement Pump
Drop Volume                  : 20mm³, (- 0/+ 5).  Mechanical, operated by knob.
Drop Times                     : 30s/drop
Drop Number Indication : Preset Digital Counter, 0 to 999999 drops
Dropping Height              : 40mm
Load on each electrode   : 1.0 Newton
Electrodes                       : Platinum

Read More

Open Close Test machine

MAAF HALAMAN INI SEDANG DALAM MAINTENANCE.
Silahkan hubungi Customer Support kami.

Model	:
Suplai daya	: AC 220V, 50Hz
Kategori	:
Dimensi(mm)	:
Berat (Kg)	:
Produk/sample uji	: Kulkas
Sesuai standar	:

Read More