Drip Box IPX12

Aplikasi:
Menguji perlindungan/tingkat proteksi suatu produk terhadap tetesan air sesuai dengan 2 angka karakteristik proteksi(Index Protection), yaitu IPX1 "Perlindungan terhadap tetes air" dan IPX2 "Perlindungan spesimen dalam posisi miring terhadap tetesan air.

Model: WT-IP12
Sumber daya: AC220V, 50Hz
Dimensi: 750 x 750 x 2100
Kategori: Proteksi terhadap air
Nozzle air: Stainless, Spasi 20 mm
Sampel uji: Air Conditioner, Pompa air, Lampu penerang jalan, dsb.
Posisi sampel: Dapat diatur, 200 mm s/d 180 mm
Dilengkapi dengan tangki suplai air & turntable.
Sesuai Standar: SNI IEC 60529 clause IPX1 and IPX2.

---

This machine for  checking  the  protection  against  water  to  prove  the  degrees  of  protection  with  the second characteristic numerals 1 "Protection against water drops" and 2 "Protection of a specimen in a position of tilt against water drops.

• water  tank  with  drip  nozzles  in  the  bottom spaced  20  mm
• drip nozzles of stainless steel.
• slider   holding devices  each  for  suspending,  precisely adjustable for leveling, 
• water  flow controlling valve with flow indication to  feed  or  to drain  the  water.
• with water filter to hold foreign material for drip nozzle.
• with water tank storage to supply water tank drip.
• water tank material with stainless steel 
• rip height from 200 mm to 2000 mm infinitely adjustable with a maximum height of the specimen  
• include rotation turntable  for IPX2 with adjustable speed
• automatic switch off for turntable if doesn’t needed for another test.

Read More

Water jet tester

Aplikasi:
Menguji perlindungan suatu produk terhadap masuknya air dan untuk membuktikan tingkat proteksi sesuai Index Protection 5/IPX5 yaitu "Perlindungan terhadap tembakan/jet air" atau IPX6 "Perlindungan terhadap jet  air yang kuat".
Pegangan jet dilengkapi dengan pengukur tekanan(pressure gauge). Nozel mudah diganti sesuai dengan index proteksi. Bahan nozzle dan tabung terbuat dari stainless steel.



Model: WP-IP56

Kategori: Proteksi terhadap air, Alat uji umum

Sampel uji: Pompa air, Lampu mobil, dsb.
Sesuai Standar: SNI  IEC 60529 gambar/figure 6, SNI IEC 60335-1 klausul 15.1. 1,  SNI IEC 60598 gambar/figure 8.

---

for checking the protection against ingress of water to prove the degrees of protection with the second characteristic numerals 5 "Protected against water jets" or 6 "Protected against powerful water jets" 

• nozzle element with knurling,
• handle, internal diameter approx. 16 mm, handle sleeve of plastic.
• flow meter, almost independent of position.
• flow control and stop valve with handwheel to adjust the water flow, with spout for hose of nominal width 19 mm (3/4"),
• hose, nominal width 19 mm (3/4"), 5 m long, with 2 hose clamps. nozzle element and tube within the handle of stainless steel, valve nickel-plated,

Read More

Access Probe AB

Bagian-bagian atau komponen-komponen dari mainan seperti sisi yang tajam, ujung yang runcing, baud, pegas, komponen elektrik harus didesain sedemikian rupa sehingga bagian/komponen terlindungi dan tidak dapat diakses oleh jari.
Access probe AB adalah alat simulasi jari untuk menguji bagian /komponen yang tidak boleh diakses, celah-celah dan lubang-lubang dari  bagian/komponen yang berbahaya jika dapat diakses.
Mainan yang diperuntukan bagi anak dibawah usia 36 bulan diuji dengan Access probe A. Sedangkan mainan yang diperuntukan bagi anak diatas 36 bulan diuji dengan Access probe B.

Spesifikasi Tehnik:

Model	: UM.F.19
Dimensi (PxLxT)mm	: 38.4 x 38.4 x 160
Material	: Jari :Stainless Steel, Gagang: Nylon
Sesuai standar	: SNI ISO 8124-1:2010, Figure 19, Klusul 5.7, Tabel 1

Read More

Low Impact Fall Tester

Menguji ketahanan plug/steker terhadap tumbukan yang di berikan pada sampel uji. Hasil uji harus menunjukan tidak adanya kerusakan

Model: UT-001
Deimensi: 300 x 150 x 450
Sampel uji: plug/steker
Sesuai standar: SNI IEC 60884-1, gambar 27

---

The specimens are subjected to an impact test by means of an apparatus as shown in figure 27. The apparatus, positioned on a pad of sponge rubber 40 mm thick, is placed together with the specimens in a freezer at a temperature of (–15 ± 2) °C, for at least 16 h. At the end of this period, each specimen, in turn, is placed in the normal position of use as shown in figure 27, and a weight is allowed to fall from a height of 100 mm. The mass of the falling weight is (1 000 ± 2) g. After the test, the specimen shall show no damage within the meaning of this standard

---

Read More

On Off Timer

Aplikasi:
Menguji sirkuit terhadap kondisi hidup dan mati sesuai dengan interval yang telah ditentukan. kondisi hidup dan mati dapat di setting susuai dengan standar yang ditetukan.
Model : GT-S03
Sumber daya: AC220V, 50Hz
Dimensi (mm): 350 x400 x 350
Tipe produk: Alat uji/mesin uji umum
Subyek uji: Semua alat yang harus di uji terhadap kondisi hidup nati. Seperti lampu luminer, dsb.
Sesuai standar: SNI IEC 60598-1

---

Circuit for testing the thermal resistance from the die to the life cycle of the luminaire series that will lead down to the terminal voltage test.

• Input Voltage   220V, 50Hz
• Dimension  300X250X500 (millimeter)
• Weight  Approx. 15 Kg
• Digital Counter &  Timer with 4 Digit
• With buzzer for signal after the test completed
• 3 Output  terminal for connected the sample test
• Safety with emergency button to break operation

Read More

Adjustable device

Mesin ini untuk menguji kekuatan luminer kabel fleksibel dari membungkuk dan meregangkan.

---

This machine for testing the strenght luminaries flexible cable from bending & flexing. According to SNI IEC 60598 Clause 4.14.3

Input Voltage Dimension Weight Base Construction Degree of angle rotation Sample holder Sample guide Comfort to standard

: AC 220V, 50Hz : 400 x 500 x 800 (millimeter) : Approximately 45 Kg : Stainless Steel : 360° : Clam with claw : Pulley flexible : SNI-IEC 60598-1

Read More

Ball impact tester

Aplikasi:

Model	:
Suplai daya	: AC 220V, 50Hz
Kategori	: Alat uji.....
Dimensi(mm)	: x x
Berat (Kg)	: 0 ~ 0 Kg
Produk/sample uji	:
Sesuai standar	: SNI IEC

Read More

Heat resistance tester

Aplikasi:
Untuk menguji ketahana isolasi pin terhadap panas yang tidak normal.

Model	: PS-003
Suplai daya	: AC 220V, 50Hz
Kategori	: Alat uji tusuk kontak
Dimensi(mm)	: 400 x 400 x 400
Berat (Kg)	: 20 ~ 25 Kg
Produk/sample uji	: Pin isolasi, steker, plug, dll
Sesuai standar	: SNI IEC 60884-1 gambar 40

---

Order
To determine testing resistance to abnormal heat of insulating sleeves of plug pins, in according to IEC 60884-1 figure 40, This test apparatus consists of an insulating plate A and of a metal part B: between these two parts an air space of 3 mm shall be provided and this distance shall be obtained through means which do not impair the air circulation around the pins.

Standard Outfit:

• 1 insulating plate A, which round and flat, thick 5 mm, have a diameter equal to twice the maximum permissible dimension of the engagement face of the plug given in the relevant standard sheet, 
• 5 metal part B, brass, length at least 20 mm, the same shape as the maximum outline of the plug according to the relevant standard sheet, 
• 1 thermocouple, type K, is inserted at a distance of 7 mm from the front surface of the metal part B in a symmetrical position 
• Insulation board : 5 mm thick round flat surface, diameter twice test diameter surface of the product. 
• Metal part B (Fixture): length of more than 20 mm, Material Brass, five pieces, can be replaced. 
• Gap between the boards of insulation and metal B : 3 mm, 
• The distance between the metal thermocouples & B: 7 mm 
• Metal bolt hole B : more than 0.1 mm

---

Read More

Encourage torque device

Aplikasi:
Untuk menguji ketahanan terhadap torsi dari sebuah peralatan listrik yang terdapat kabel fleksibel dengan diameter sampai dengan 10 mm yang tidak dapat dikawati ulang.

Model	:
Suplai daya	: -
Kategori	: Kabel, plug & soket
Dimensi(mm)	: 630 x 120 x 180
Berat (Kg)	: 8 ~ 14 Kg
Produk/sample uji	: Kabel fleksibel
Sesuai standar	: SNI IEC60884-1 klausul 23.2 ( table 18),   SNI IEC60335-1 klausul 25.15. (table 12 )

Read More