Menguji kekuatan retensi kabel terhadap daya tarikan/beban mekanis & untuk memeriksa efektivitas retensi kabel dari kabel senur.
Model: CPL-F20.A
Suber daya: AC220 V, 50Hz
Dimensi (mm): 550 x 700 x 350
Sesuai standar: SNI IEC 60884-1 gambar 20
Burning Test Machine
Menentukan tingkat proteksi sampel terhadap pembakaran linear/nyala api, bara api dan percikan api yang dapat merusak spesimen. a - alatuji-sni.com.
Berbagai produk alat uji lokal
Kami merancang dan mendisain alat uji sesuai dengan standar SNI, IEC, ISO, EN, ASTM,CPSC, dll - alatuji-sni.com.
Switch Test Apparatus
Menguji daya tahan untuk switch tombol dan switch push(tekan),Menilai apakah switch mampu bertahan dalam penggunaan normal dari kerusakan mekanis - alatuji-sni.com.
Lokal Produk Indonesia
Menguji perlindungan/tingkat proteksi suatu produk terhadap tetesan, seprotan, semburan air sesuai dengan angka karakteristik proteksi(Index Protection) - alatuji-sni.com.
Penjualan alat uji
Berbagai macam alat uji kami produksi dan rancang untuk memenuhi laboratorium uji anda - alatuji-sni.com
Tampilkan postingan dengan label Plug dan soket. Tampilkan semua postingan
Tampilkan postingan dengan label Plug dan soket. Tampilkan semua postingan
Cord Retention Tester
Menguji kekuatan retensi kabel terhadap daya tarikan/beban mekanis & untuk memeriksa efektivitas retensi kabel dari kabel senur.
Model: CPL-F20.A
Suber daya: AC220 V, 50Hz
Dimensi (mm): 550 x 700 x 350
Sesuai standar: SNI IEC 60884-1 gambar 20
Pin Insulation Heat Tester
Untuk menguji ketahanan konektor pin isolasi plug/steker terhadap panas yang tidak normal.
Model: CPL-A40.1
Sumber daya: AC220V, 50Hz
Dimensi: 450 x 350 x 350
Sampel Uji: Plug, Steker, dsb.
Sesuai standar: SNI IEC 60884-1 Gambar 40
To determine testing resistance to abnormal heat of insulating sleeves of plug pins, in according to IEC 60884-1 figure 40, This test apparatus consists of an insulating plate A and of a metal part B: between these two parts an air space of 3 mm shall be provided and this distance shall be obtained through means which do not impair the air circulation around the pins.
Standard Outfit:
1 insulating plate A, which round and flat, thick 5 mm, have a diameter equal to twice the maximum permissible dimension of the engagement face of the plug given in the relevant standard sheet,
5 metal part B, brass, length at least 20 mm, the same shape as the maximum outline of the plug according to the relevant standard sheet,
1 thermo couple, type K, is inserted at a distance of 7 mm from the front surface of the metal part B in a symmetrical position.
Insulation board : 5 mm thick round flat surface, diameter twice test diameter surface of the product.
Metal part B (Fixture): length of more than 20 mm, Material Brass, five pieces, can be replaced.
Gap between the boards of insulation and metal B : 3 mm,
The distance between the metal thermo couples & B: 7 mm
Metal bolt hole B : more than 0.1 mm
Conforms to standard : SNI IEC 60884-1 Figure 40
Conductor Damage Checker
- memeriksa tingkat kerusakan kawat konduktor kabel
- menilai apakah desain dan struktur dari terminal klem sekrup dapat merusak kawat konduktor kabel
- memeriksa apakah terminal klem sekrup tahan stres/tarikan selama proses penggunaan normal.
Spesifikasi:
| Model Dimensi Sumber Daya Platen Diameter Circular Radial/Diameter (mm) Kecepatan Putaran Periode Lama Uji Jarak Platen dengan Terminal(H)(mm) Load Beban(Kg) Conductor Sample Test Sesuai Standar | : CDC-A11 : 600x600x950 : AC 220V, 50 HZ : 75mm : 37.5/75 : (10 ± 2) rpm : Approximately 15 minute : 260 & 280 (± 15) : 0.3, 0.4, 0.7, 0.9, 1.4, 2.0 : 75mm longer than H : SNI IEC 60884-1 Gambar 11 |
Tumbling Barrel Test Apparatus
| Aplikasi: Alat uji yang berfungsi untuk mensimulasikan kondisi jatuh berulang suatu part kecil atau komponen seperti steker/plug, dll. Model: CPL-TB Sumber daya: AC220V, 50Hz Dimensi(mm): 650X650X1000 Ketinggian jatuh untuk sample: 500 mm Bidang permukaan jatuh: 20 mm kayu blackwood/plywood Kecepatan berputar: 5 rotasi/menit Jumlah jatuh: 10x jatuh/minute Produk/sampel uji: Steker, Plug, Soket, Komponen kecil,dll. Sesuai standar: SNI IEC 60884-1,SNI IEC 60068-2-31 |
Alat Uji Tusuk Kontak
 |  |
Low Impact Fall Tester
Model: UT-001
Deimensi: 300 x 150 x 450
Sampel uji: plug/steker
Sesuai standar: SNI IEC 60884-1, gambar 27
The specimens are subjected to an impact test by means of an apparatus as shown in figure 27. The apparatus, positioned on a pad of sponge rubber 40 mm thick, is placed together with the specimens in a freezer at a temperature of (–15 ± 2) °C, for at least 16 h. At the end of this period, each specimen, in turn, is placed in the normal position of use as shown in figure 27, and a weight is allowed to fall from a height of 100 mm. The mass of the falling weight is (1 000 ± 2) g. After the test, the specimen shall show no damage within the meaning of this standard
Pin Abrasion Tester-02
Untuk menentukan ketahanan abrasi isolasi dari sebuah pin konektor.
The test apparatus comprises a horizontally disposed beam, which is pivoted about its center point. A short length of steel wire, 1 mm in diameter and bent into a U-shape, the base of the U being straight, is rigidly attached, at both ends, to one end of the beam, so that the straight part projects below the beam and is parallel to the axis of the beam pivot.
The plug is held by a suitable clamp in such a position that the straight part of the steel wire rests on the plug pin, perpendicular to it. The pin slopes downwards at an angle of 10° To the horizontal.
The beam is loaded so that the wire exerts a force of 4 N on the pin.
- Model : PAT-02
- Power Supply : 220V 50Hz
- Counter Display : 6 Digit
- Tingkat abrading : 30 ± 1 gerakan per menit
- Beban: 4-0.1N
- Gerak maju mundur menggores: 7 – 9 mm
- Counter Digit : 6 Digit
- Sudut pin sampel : 10°
- Radius pin baja: 0,25 mm ± 0,02 mm
- Kecepatan menggores : 20 mm/s ± 5 mm/s
- Sesuai Standar : SNI IEC60884-1 Figure 28
 |  |
Pin abrasion tester-01
Untuk menentukan ketahanan abrasi pin isolasi steker/plug dengan cara mensimulasikn gerakan mengkikis terhadap pin isolasi sampel uji.
Plug pin abrasion. to determine the abrasion resistance of insulating sleeves of plug pins by moving backwards and forwards, according to SNI IEC 60884-1 Figure 28.
The test apparatus comprises a horizontally disposed beam, which is pivoted about its center point. A short length of steel wire, 1 mm in diameter and bent into a U-shape, the base of the U being straight, is rigidly attached, at both ends, to one end of the beam, so that the straight part projects below the beam and is parallel to the axis of the beam pivot.
The plug is held by a suitable clamp in such a position that the straight part of the steel wire rests on the plug pin, perpendicular to it. The pin slopes downwards at an angle of 10° To the horizontal.
The beam is loaded so that the wire exerts a force of 4 N on the pin.
Spesifikasi:
- Model : PAT-01
- Power Supply : 220V 50Hz
- Dimensi(mm) : 500 x 350 x 350
- Berat (Kg) : 20~30 Kg
- Counter Display : 6 Digit
- Tingkat abrading : 30 ± 1 gerakan per menit
- Beban: 4-0.1N
- Gerak maju mundur mengkikis: 7 – 9 mm
- Counter Digit : 6 Digit
- Sudut pin sampel : 10°
- Radius pin baja: 0,25 mm ± 0,02 mm
- Kecepatan mengkikis: 20 mm/s ± 5 mm/s
- Sesuai Standar : SNI IEC60884-1 Figure 28
