IPX34 Test Machine

Aplikasi:
Menguji dan memeriksa perlindungan terhadap semprotan air untuk membuktikan tingkat proteksi produk/sampel uji sesuai dengan indek proteksi IPX3 dan IPX4 "Perlindungan terhadap semprotan Air " dan . " Perlindungan terhadap percikan air"

Model: WP-IPX34
Tipe: Alat uji umum/Universal Testing Machine
Sumber daya: AC 220V, 50Hz

Sampel uji:  Pompa, Outdor Air condioner. Lampu jalan, dsb.
Sesuai standard: SNI IEC 60529 gambar/figure 4, SNI IEC 60598 klausul/clause 9.2.5, SNI IEC 60947

---

Checking the protection against water, to prove the degree of protection IPX3 and IPX4. for \”Protection against Spraying Water\” and \”Protection against Splashing Water\” tests. Oscillating tubes with spray nozzles of 0,4 mm Easy &adjustable Ring Stand for set up leveling the height Water flow rate for set the rate water supply into oscillating tube. With water filter to hold foreign material for drip nozzle. Turntable with adjustable speed Multiple of angle for rotation around sample up to 180 Speed for rotate around sample approximately 60 per second.

---

Read More

Pendulum Impact Tester

Aplikasi:
Menguji kekuatan samel uji terhadap tumbukan/benturan

Model	: PIT-032
Suplai daya	: -
Kategori	: Uji kuat mekanis, uji tumbukan
Dimensi(mm)	:
Berat (Kg)	: 0 ~ 0 Kg
Produk/sample uji	: MCB, RCCB, Soket
Sesuai standar	: SNI IEC 60884-1, Figures 22,23, 24 and 25

---

The test apparatus consists basically of a pendulum rotating at its upper end in such a way as to be kept in a vertical plane. The axis of  the pivot is at 1000㎜ above the measuring point.

Pendulum Length :1000mm ,Impact
Height :100mm,150mm,200mm,250mm,400.
Material of Construction : Aluminum Profile
Impact Energy: low energy　(not exceeding 1J) or high energy(2J and above).
Striking Element : equivalent mass: low energy:150g and 250g.
Striking Element : equivalent mass: height energy:500g.

Conforms to Standard : SNI IEC 60884-1, Figures 22,23, 24 and 25

---

Read More

Stroke Durability Tester

Aplikasi: 
Menguji kekuatan pasangan steker & soket (Plug & socket outlet) dari kerusakan dalam penggunaan yang normal.

---

It can provide the test of breaking volume of socket and outlet, and mechanical action of normal operation lifespan. Using pneumatic unit as motive power, power-on time and intermittent time can be adjusted.

Model : SDT-02
Power Supply : 220V 50Hz
Dimensi(mm) : 600 x 400 x 500
Berat (Kg) : 45 ~ 50Kg
Air source : 5 ~ 8 kg/cm2
Working station : 2 Station
Terminal Type : 2 pins & 3 Pins
Counter Display : 6 Digit
Sesuai standar : SNI IEC 60884-1 Figure 16  & Clause 20

Read More

Burning Test Machine

Aplikasi: Menentukan tingkat proteksi sampel terhadap pembakaran linear/nyala api, bara api & percikan api yang dapat merusak spesimen.

Model	: FM-02
Suplai daya	: AC 220V, 50Hz
Kategori	: Flammability Tester
Dimensi(mm)	: 1100 X 600 X 800 mm
Berat (Kg)	: 75 ~ 90 Kg
Produk/sample uji	: Plastik & material lain non logam
Sesuai standar	: SNI ISO 845, ISO 9773

---

It screening procedure for comparing the relative burning behavior specimens made from plastic and other non-metallic materials, exposed to a flame ignition source of 50W or 500W nominal power. These test methods determine the linear burning rate and the after flame/afterglow times, as well as the damaged length of specimens. They are applicable to solid and cellular materials that have an apparent density of not less than 250kg/m3, determined in accordance with ISO845. Then do not apply to materials that shrink away from the applied flame without ignition; ISO9773 should be used for thin flexible materials.

• Timing device with four digit 9999X0.1s
• Automatic Carried unit device for movement of needle
• Smoke/fume exhaust Ø 113 mm incorporated in chamber
• Black painted cabinet more than 0,5 m (2.05 m )
• Gas flow regulating valve for flame height, manual adjustment
• Gas pressure regulator and safety control
• Needle burner tilt to 45° from the vertical, manual adjustment
• Ring Stand easy to grip the sample
• Preset time of testing; 5s, 10s, 20s, 30s, 60s, 120
• Lighting inside the cabinet and fan control
• Easy manual panel control with push button lamp
• Timer Display for record data time burning, time flame
• Time for temperature to increase (100° to 700°; 23,5 s)
• Combustion angle 0 , 20 , 45
• Height of flame Up to 125 mm
• Gas Supply Propane min 95% purity

---

Read More

Mechanical shock tester

Aplikasi: -Menguji & memastikan resistensi sampel terhadap mekanik shock -Umumnya dipakai untuk menguji kuat mekanis dari RC32CB Model: RC-A Sumber daya: AC220V, 50Hz Dimensi: 600 x 350 x 350 Sample Uji: RCCB Sesuai standar: SNI IEC 61008-1 gambar 11

Read More

Test wire 1mm dan Test Probe 2,5mm

Model	: IP-1 & IP 2.5
Suplai daya:	: AC 220V, 50Hz
Kategori	: Alat uji umum
Dimensi	:
Berat	: 0,2 Kg
Sampel uji	: Umum
Sesuai standar	: SNI IEC 61032 test probe D, SNI  IEC529 untuk IP4

Read More

Plug Flexing Machine

Aplikasi:

Model	:
Suplai daya	: AC 220V, 50Hz
Kategori	: Alat uji.....
Dimensi(mm)	: x x
Berat (Kg)	: 0 ~ 0 Kg
Produk/sample uji	:
Sesuai standar	: SNI IEC

Order

Read More

Tracking Test Apparatus

Aplikasi:
- Untuk melakukan Comparative tracking Index (CTI)/Indeks pelacakan Perbandingan.
- Mensimulasikan pelacakan arus pada bahan isolasi padat dengan memberikan tetesan NH4Cl antara elektroda. Selama penggunaan normal bahan isolasi dapat terkena kelembaban dan kotoran, jika kotoran tersebut bersifat konduktif, dapat menyebabkan stress/tegangan dan dapat mengakibatkan bahaya kebakaran.

Model	: TRX-029
Suplai daya	: AC 220V, 50Hz
Kategori	: Flammability test
Dimensi(mm)	: 600 x 500 x 650
Berat (Kg)	: 30~50 Kg
Sample uji	:  Bahan isolasi padat
Sesuai standar	: SNI IEC 60335-1, SNI IEC 60065,SNI IEC 61029,  SNI IEC 60112, SNI IEC 61058-1, SNI  IEC 60669-1,  SNI  IEC 60884-1, SNI IEC 60950-1, SNI IEC 60598-1, IEC 60320-1, IEC 60898-1, IEC 60400, IEC 60238, IEC 60730-1, ASTM D 3638,....etc.

---

Comparative Tracking Index Test Apparatus is designed to carry out the comparative tracking index test described in IEC 60112. As per the standard, Tracking is “Progressive formation of conducting paths, which are produced on the surface and/or within a solid insulating material, due to the combined effects of electric stress and electrolytic contamination.” And Tracking Failure is “Failure of insulation due to tracking between conducting parts.”
The Comparative Tracking Index Test Apparatus provides a safe method to test insulators as per the standard. In this test, an insulator is subject to high voltage with the help of electrodes and a contaminant is dropped on the insulator between the electrodes. The comparative tracking index of the insulator is thus found out.

Spesifikasi tehnik:
Test Voltage                    : 100 to 600V AC, adjustable (Step Voltage 25VAC)
Trip Current                    : 0.5A  for 2 s
Voltage Indication            : 3 Digit Voltmeter, 0 to 600V
Current Indication           : 31/2 Digit Ammeter, 0 to 2.000A
Dropping Unit                 : Automatic by special positive displacement Pump
Drop Volume                  : 20mm³, (- 0/+ 5).  Mechanical, operated by knob.
Drop Times                     : 30s/drop
Drop Number Indication : Preset Digital Counter, 0 to 999999 drops
Dropping Height              : 40mm
Load on each electrode   : 1.0 Newton
Electrodes                       : Platinum

Read More