Menguji kekuatan retensi kabel terhadap daya tarikan/beban mekanis & untuk memeriksa efektivitas retensi kabel dari kabel senur.
Model: CPL-F20.A
Suber daya: AC220 V, 50Hz
Dimensi (mm): 550 x 700 x 350
Sesuai standar: SNI IEC 60884-1 gambar 20
Burning Test Machine
Menentukan tingkat proteksi sampel terhadap pembakaran linear/nyala api, bara api dan percikan api yang dapat merusak spesimen. a - alatuji-sni.com.
Berbagai produk alat uji lokal
Kami merancang dan mendisain alat uji sesuai dengan standar SNI, IEC, ISO, EN, ASTM,CPSC, dll - alatuji-sni.com.
Switch Test Apparatus
Menguji daya tahan untuk switch tombol dan switch push(tekan),Menilai apakah switch mampu bertahan dalam penggunaan normal dari kerusakan mekanis - alatuji-sni.com.
Lokal Produk Indonesia
Menguji perlindungan/tingkat proteksi suatu produk terhadap tetesan, seprotan, semburan air sesuai dengan angka karakteristik proteksi(Index Protection) - alatuji-sni.com.
Penjualan alat uji
Berbagai macam alat uji kami produksi dan rancang untuk memenuhi laboratorium uji anda - alatuji-sni.com
Tampilkan postingan dengan label Alat uji tusuk kontak. Tampilkan semua postingan
Tampilkan postingan dengan label Alat uji tusuk kontak. Tampilkan semua postingan
Cord Retention Tester
Menguji kekuatan retensi kabel terhadap daya tarikan/beban mekanis & untuk memeriksa efektivitas retensi kabel dari kabel senur.
Model: CPL-F20.A
Suber daya: AC220 V, 50Hz
Dimensi (mm): 550 x 700 x 350
Sesuai standar: SNI IEC 60884-1 gambar 20
Glow Wire Test Apparatus
Metode terbaik untuk menguji produk elektroteknik berkaitan dengan bahaya kebakaran adalah meniru persis kondisi yang terjadi dalam praktek. Dalam kebanyakan kasus, hal ini tidak mungkin. Oleh karena itu, untuk alasan praktis, pengujian produk elektroteknik berkaitan dengan bahaya kebakaran yang terbaik dilakukan dengan mensimulasikan sedekat mungkin efek yang sebenarnya terjadi dalam praktek.
Bagian peralatan elektroteknik yang mungkin terkena stres termal berlebihan karena efek listrik dan kerusakan yang mungkin mengganggu keamanan peralatan tidak seharusnya terlalu terpengaruh oleh panas dan api yang dihasilkan oleh peralatan tersebut.
Terjadinya nyala api pada suatu komponen bisa diakibatkan oleh kondisi tertentu. Misalnya, adanya gangguan arus yang mengalir melalui kawat/kabel, kelebihan beban pada komponen, koneksi yang buruk, dll. Kondisi tersebut bisa memicu suhu yang tinggi sehingga bisa nyala api pada bagian di sekitarnya.
“Glow Wire Test Apparatus” adalah adalah alat uji untuk mensimulasi kondisi-kondisi tersebut di atas. Alat uji ini dipakai dibanyak standar sebagai salah satu rangkaian pengujian yang bertujuan untuk menentukan bahaya kebakaran.
Pada produk tusuk kontak & kontak-kontaknya, fungsi utama alat ini adalah untuk menguji material isolasi padat atau material padat lainnya yang mudah terbakar. Tujuan hasil uji memungkinkan untuk memberikan suatu perbandingan relatif bermacam-macam material yang digunakan, sehingga material tersebut memiliki kemampuan memadamkan nyala atau pijar dan memiliki kemampuan untuk tidak menghasilkan partikel nyala atau pijar yang dapat menyebar ke material lain disekitarnya.
Glow Wire Test Apparatus ini adalah seri ke-5 yang kami rancang sedemikian sehingga sesuai dengan standar yang disyaratkan.
Spesifikasi:
Model: DGW-03
Serial No.: 11140020
Dimensi (pxlxt) mm: 600 x 450 x 780
Berat: Approx, 45 Kg
Material Mekanik: Stainless Steel
Material Panel: Plat Esser 3 mm
Input Power: AC-220v, 50Hz
Temperatur Kontrol: Digital display, Akurasi ± 0.05°C
Timer: Digital display 0~9999
Amper Meter: Digital display 150 A
Material Glow-wire: Ni/Cr (80/20), Diameter 4mm
Thermocouple: 1mm tipe-K
Seting Arus: Variable Transformer Up to 9999O C
Pemanas kawat : Heater Travo 500VA, 2.5V 150A
Beban: 2 pcs, masing-masing 0.5N total 1.0 N, Stainless Steel
Tempat sampel: Stainless berlubang dilengkapi dengan penggaris baja
Pembawa sampel: Otomatis berhenti & balik kembali, dengan roda roll bearing
Lama pembakaran: Waktu mulai & berakhir Otomatis
Alas tisu: Kayu Polywood >10mm (19mm)
Sesuai standar: IEC60695-2-10, EC60695-1-10, EC60335-1, IEC60598-1, IEC60745-1, IEC60884-1. GB/T5169.10, GB7000.1-2002， Gb4706, dll.
Pin Insulation Heat Tester
Untuk menguji ketahanan konektor pin isolasi plug/steker terhadap panas yang tidak normal.
Model: CPL-A40.1
Sumber daya: AC220V, 50Hz
Dimensi: 450 x 350 x 350
Sampel Uji: Plug, Steker, dsb.
Sesuai standar: SNI IEC 60884-1 Gambar 40
To determine testing resistance to abnormal heat of insulating sleeves of plug pins, in according to IEC 60884-1 figure 40, This test apparatus consists of an insulating plate A and of a metal part B: between these two parts an air space of 3 mm shall be provided and this distance shall be obtained through means which do not impair the air circulation around the pins.
Standard Outfit:
1 insulating plate A, which round and flat, thick 5 mm, have a diameter equal to twice the maximum permissible dimension of the engagement face of the plug given in the relevant standard sheet,
5 metal part B, brass, length at least 20 mm, the same shape as the maximum outline of the plug according to the relevant standard sheet,
1 thermo couple, type K, is inserted at a distance of 7 mm from the front surface of the metal part B in a symmetrical position.
Insulation board : 5 mm thick round flat surface, diameter twice test diameter surface of the product.
Metal part B (Fixture): length of more than 20 mm, Material Brass, five pieces, can be replaced.
Gap between the boards of insulation and metal B : 3 mm,
The distance between the metal thermo couples & B: 7 mm
Metal bolt hole B : more than 0.1 mm
Conforms to standard : SNI IEC 60884-1 Figure 40
Heat Pressure Tester
Untuk menguji tekanan pada pin isolasi tusuk kontak pada suhu 200 ° C dengan beban 2.5N.
Alat ini memiliki pisau persegi panjang (lihat IEC 60884-1 Figure 41A) dengan tepi ketajaman pisau 0,7 mm digunakan untuk tusuk kontak dengan pin bulat, atau pisau yang memiliki bentuk bulat (lihat gambar 41b), dengan diameter 6 mm dan tepi (0,7 ± 0,01) mm,
| Model | : HPT-02 |
| Suplai daya | : - |
| Kategori | : Alat uji tusuk kontak |
| Dimensi(mm) | : 150 x 250 x 300 |
| Berat (Kg) | : 5 Kg |
| Produk/sample uji | : Tusuk Kontak, Steker |
| Sesuai standar | : SNI IEC IEC 60884-1 Figure 41, BS1363. |
Conductor Damage Checker
- memeriksa tingkat kerusakan kawat konduktor kabel
- menilai apakah desain dan struktur dari terminal klem sekrup dapat merusak kawat konduktor kabel
- memeriksa apakah terminal klem sekrup tahan stres/tarikan selama proses penggunaan normal.
Spesifikasi:
| Model Dimensi Sumber Daya Platen Diameter Circular Radial/Diameter (mm) Kecepatan Putaran Periode Lama Uji Jarak Platen dengan Terminal(H)(mm) Load Beban(Kg) Conductor Sample Test Sesuai Standar | : CDC-A11 : 600x600x950 : AC 220V, 50 HZ : 75mm : 37.5/75 : (10 ± 2) rpm : Approximately 15 minute : 260 & 280 (± 15) : 0.3, 0.4, 0.7, 0.9, 1.4, 2.0 : 75mm longer than H : SNI IEC 60884-1 Gambar 11 |
Tumbling Barrel Test Apparatus
| Aplikasi: Alat uji yang berfungsi untuk mensimulasikan kondisi jatuh berulang suatu part kecil atau komponen seperti steker/plug, dll. Model: CPL-TB Sumber daya: AC220V, 50Hz Dimensi(mm): 650X650X1000 Ketinggian jatuh untuk sample: 500 mm Bidang permukaan jatuh: 20 mm kayu blackwood/plywood Kecepatan berputar: 5 rotasi/menit Jumlah jatuh: 10x jatuh/minute Produk/sampel uji: Steker, Plug, Soket, Komponen kecil,dll. Sesuai standar: SNI IEC 60884-1,SNI IEC 60068-2-31 |
Alat Uji Tusuk Kontak
 |  |
Drip Box IPX12
Menguji perlindungan/tingkat proteksi suatu produk terhadap tetesan air sesuai dengan 2 angka karakteristik proteksi(Index Protection), yaitu IPX1 "Perlindungan terhadap tetes air" dan IPX2 "Perlindungan spesimen dalam posisi miring terhadap tetesan air.
Model: WT-IP12
Sumber daya: AC220V, 50Hz
Dimensi: 750 x 750 x 2100
Kategori: Proteksi terhadap air
Nozzle air: Stainless, Spasi 20 mm
Sampel uji: Air Conditioner, Pompa air, Lampu penerang jalan, dsb.
Posisi sampel: Dapat diatur, 200 mm s/d 180 mm
Dilengkapi dengan tangki suplai air & turntable.
Sesuai Standar: SNI IEC 60529 clause IPX1 and IPX2.
This machine for checking the protection against water to prove the degrees of protection with the second characteristic numerals 1 "Protection against water drops" and 2 "Protection of a specimen in a position of tilt against water drops.
- water tank with drip nozzles in the bottom spaced 20 mm
- drip nozzles of stainless steel.
- slider holding devices each for suspending, precisely adjustable for leveling,
- water flow controlling valve with flow indication to feed or to drain the water.
- with water filter to hold foreign material for drip nozzle.
- with water tank storage to supply water tank drip.
- water tank material with stainless steel
- rip height from 200 mm to 2000 mm infinitely adjustable with a maximum height of the specimen
- include rotation turntable for IPX2 with adjustable speed
- automatic switch off for turntable if doesn’t needed for another test.
Low Impact Fall Tester
Model: UT-001
Deimensi: 300 x 150 x 450
Sampel uji: plug/steker
Sesuai standar: SNI IEC 60884-1, gambar 27
The specimens are subjected to an impact test by means of an apparatus as shown in figure 27. The apparatus, positioned on a pad of sponge rubber 40 mm thick, is placed together with the specimens in a freezer at a temperature of (–15 ± 2) °C, for at least 16 h. At the end of this period, each specimen, in turn, is placed in the normal position of use as shown in figure 27, and a weight is allowed to fall from a height of 100 mm. The mass of the falling weight is (1 000 ± 2) g. After the test, the specimen shall show no damage within the meaning of this standard
Heat resistance tester
Untuk menguji ketahana isolasi pin terhadap panas yang tidak normal.
| Model | : PS-003 |
| Suplai daya | : AC 220V, 50Hz |
| Kategori | : Alat uji tusuk kontak |
| Dimensi(mm) | : 400 x 400 x 400 |
| Berat (Kg) | : 20 ~ 25 Kg |
| Produk/sample uji | : Pin isolasi, steker, plug, dll |
| Sesuai standar | : SNI IEC 60884-1 gambar 40 |
Order
To determine testing resistance to abnormal heat of insulating sleeves of plug pins, in according to IEC 60884-1 figure 40, This test apparatus consists of an insulating plate A and of a metal part B: between these two parts an air space of 3 mm shall be provided and this distance shall be obtained through means which do not impair the air circulation around the pins.
Standard Outfit:
- 1 insulating plate A, which round and flat, thick 5 mm, have a diameter equal to twice the maximum permissible dimension of the engagement face of the plug given in the relevant standard sheet,
- 5 metal part B, brass, length at least 20 mm, the same shape as the maximum outline of the plug according to the relevant standard sheet,
- 1 thermocouple, type K, is inserted at a distance of 7 mm from the front surface of the metal part B in a symmetrical position
- Insulation board : 5 mm thick round flat surface, diameter twice test diameter surface of the product.
- Metal part B (Fixture): length of more than 20 mm, Material Brass, five pieces, can be replaced.
- Gap between the boards of insulation and metal B : 3 mm,
- The distance between the metal thermocouples & B: 7 mm
- Metal bolt hole B : more than 0.1 mm
Encourage torque device
Untuk menguji ketahanan terhadap torsi dari sebuah peralatan listrik yang terdapat kabel fleksibel dengan diameter sampai dengan 10 mm yang tidak dapat dikawati ulang.
| Model | : |
| Suplai daya | : - |
| Kategori | : Kabel, plug & soket |
| Dimensi(mm) | : 630 x 120 x 180 |
| Berat (Kg) | : 8 ~ 14 Kg |
| Produk/sample uji | : Kabel fleksibel |
| Sesuai standar | : SNI IEC60884-1 klausul 23.2 ( table 18), SNI IEC60335-1 klausul 25.15. (table 12 ) |
Pendulum Impact Tester
Menguji kekuatan samel uji terhadap tumbukan/benturan
| Model | : PIT-032 |
| Suplai daya | : - |
| Kategori | : Uji kuat mekanis, uji tumbukan |
| Dimensi(mm) | : |
| Berat (Kg) | : 0 ~ 0 Kg |
| Produk/sample uji | : MCB, RCCB, Soket |
| Sesuai standar | : SNI IEC 60884-1, Figures 22,23, 24 and 25 |
The test apparatus consists basically of a pendulum rotating at its upper end in such a way as to be kept in a vertical plane. The axis of the pivot is at 1000㎜ above the measuring point.
Pendulum Length :1000mm ,Impact
Height :100mm,150mm,200mm,250mm,400.
Material of Construction : Aluminum Profile
Impact Energy: low energy (not exceeding 1J) or high energy(2J and above).
Striking Element : equivalent mass: low energy:150g and 250g.
Striking Element : equivalent mass: height energy:500g.
Conforms to Standard : SNI IEC 60884-1, Figures 22,23, 24 and 25
Stroke Durability Tester
Menguji kekuatan pasangan steker & soket (Plug & socket outlet) dari kerusakan dalam penggunaan yang normal.
It can provide the test of breaking volume of socket and outlet, and mechanical action of normal operation lifespan. Using pneumatic unit as motive power, power-on time and intermittent time can be adjusted.
Model : SDT-02
Power Supply : 220V 50Hz
Dimensi(mm) : 600 x 400 x 500
Berat (Kg) : 45 ~ 50Kg
Air source : 5 ~ 8 kg/cm2
Working station : 2 Station
Terminal Type : 2 pins & 3 Pins
Counter Display : 6 Digit
Sesuai standar : SNI IEC 60884-1 Figure 16 & Clause 20
Burning Test Machine
| Model | : FM-02 |
| Suplai daya | : AC 220V, 50Hz |
| Kategori | : Flammability Tester |
| Dimensi(mm) | : 1100 X 600 X 800 mm |
| Berat (Kg) | : 75 ~ 90 Kg |
| Produk/sample uji | : Plastik & material lain non logam |
| Sesuai standar | : SNI ISO 845, ISO 9773 |
It screening procedure for comparing the relative burning behavior specimens made from plastic and other non-metallic materials, exposed to a flame ignition source of 50W or 500W nominal power. These test methods determine the linear burning rate and the after flame/afterglow times, as well as the damaged length of specimens. They are applicable to solid and cellular materials that have an apparent density of not less than 250kg/m3, determined in accordance with ISO845. Then do not apply to materials that shrink away from the applied flame without ignition; ISO9773 should be used for thin flexible materials.
- Timing device with four digit 9999X0.1s
- Automatic Carried unit device for movement of needle
- Smoke/fume exhaust Ø 113 mm incorporated in chamber
- Black painted cabinet more than 0,5 m (2.05 m )
- Gas flow regulating valve for flame height, manual adjustment
- Gas pressure regulator and safety control
- Needle burner tilt to 45° from the vertical, manual adjustment
- Ring Stand easy to grip the sample
- Preset time of testing; 5s, 10s, 20s, 30s, 60s, 120
- Lighting inside the cabinet and fan control
- Easy manual panel control with push button lamp
- Timer Display for record data time burning, time flame
- Time for temperature to increase (100° to 700°; 23,5 s)
- Combustion angle 0 , 20 , 45
- Height of flame Up to 125 mm
- Gas Supply Propane min 95% purity
Tracking Test Apparatus
- Untuk melakukan Comparative tracking Index (CTI)/Indeks pelacakan Perbandingan.
- Mensimulasikan pelacakan arus pada bahan isolasi padat dengan memberikan tetesan NH4Cl antara elektroda. Selama penggunaan normal bahan isolasi dapat terkena kelembaban dan kotoran, jika kotoran tersebut bersifat konduktif, dapat menyebabkan stress/tegangan dan dapat mengakibatkan bahaya kebakaran.
| Model | : TRX-029 |
| Suplai daya | : AC 220V, 50Hz |
| Kategori | : Flammability test |
| Dimensi(mm) | : 600 x 500 x 650 |
| Berat (Kg) | : 30~50 Kg |
| Sample uji | : Bahan isolasi padat |
| Sesuai standar | : SNI IEC 60335-1, SNI IEC 60065,SNI IEC 61029, SNI IEC 60112, SNI IEC 61058-1, SNI IEC 60669-1, SNI IEC 60884-1, SNI IEC 60950-1, SNI IEC 60598-1, IEC 60320-1, IEC 60898-1, IEC 60400, IEC 60238, IEC 60730-1, ASTM D 3638,....etc. |
Comparative Tracking Index Test Apparatus is designed to carry out the comparative tracking index test described in IEC 60112. As per the standard, Tracking is “Progressive formation of conducting paths, which are produced on the surface and/or within a solid insulating material, due to the combined effects of electric stress and electrolytic contamination.” And Tracking Failure is “Failure of insulation due to tracking between conducting parts.”
The Comparative Tracking Index Test Apparatus provides a safe method to test insulators as per the standard. In this test, an insulator is subject to high voltage with the help of electrodes and a contaminant is dropped on the insulator between the electrodes. The comparative tracking index of the insulator is thus found out.
Spesifikasi tehnik:
Test Voltage : 100 to 600V AC, adjustable (Step Voltage 25VAC)
Trip Current : 0.5A for 2 s
Voltage Indication : 3 Digit Voltmeter, 0 to 600V
Current Indication : 31/2 Digit Ammeter, 0 to 2.000A
Dropping Unit : Automatic by special positive displacement Pump
Drop Volume : 20mm³, (- 0/+ 5). Mechanical, operated by knob.
Drop Times : 30s/drop
Drop Number Indication : Preset Digital Counter, 0 to 999999 drops
Dropping Height : 40mm
Load on each electrode : 1.0 Newton
Electrodes : Platinum
Pin Abrasion Tester-02
Untuk menentukan ketahanan abrasi isolasi dari sebuah pin konektor.
The test apparatus comprises a horizontally disposed beam, which is pivoted about its center point. A short length of steel wire, 1 mm in diameter and bent into a U-shape, the base of the U being straight, is rigidly attached, at both ends, to one end of the beam, so that the straight part projects below the beam and is parallel to the axis of the beam pivot.
The plug is held by a suitable clamp in such a position that the straight part of the steel wire rests on the plug pin, perpendicular to it. The pin slopes downwards at an angle of 10° To the horizontal.
The beam is loaded so that the wire exerts a force of 4 N on the pin.
- Model : PAT-02
- Power Supply : 220V 50Hz
- Counter Display : 6 Digit
- Tingkat abrading : 30 ± 1 gerakan per menit
- Beban: 4-0.1N
- Gerak maju mundur menggores: 7 – 9 mm
- Counter Digit : 6 Digit
- Sudut pin sampel : 10°
- Radius pin baja: 0,25 mm ± 0,02 mm
- Kecepatan menggores : 20 mm/s ± 5 mm/s
- Sesuai Standar : SNI IEC60884-1 Figure 28
 |  |
Pin abrasion tester-01
Untuk menentukan ketahanan abrasi pin isolasi steker/plug dengan cara mensimulasikn gerakan mengkikis terhadap pin isolasi sampel uji.
Plug pin abrasion. to determine the abrasion resistance of insulating sleeves of plug pins by moving backwards and forwards, according to SNI IEC 60884-1 Figure 28.
The test apparatus comprises a horizontally disposed beam, which is pivoted about its center point. A short length of steel wire, 1 mm in diameter and bent into a U-shape, the base of the U being straight, is rigidly attached, at both ends, to one end of the beam, so that the straight part projects below the beam and is parallel to the axis of the beam pivot.
The plug is held by a suitable clamp in such a position that the straight part of the steel wire rests on the plug pin, perpendicular to it. The pin slopes downwards at an angle of 10° To the horizontal.
The beam is loaded so that the wire exerts a force of 4 N on the pin.
Spesifikasi:
- Model : PAT-01
- Power Supply : 220V 50Hz
- Dimensi(mm) : 500 x 350 x 350
- Berat (Kg) : 20~30 Kg
- Counter Display : 6 Digit
- Tingkat abrading : 30 ± 1 gerakan per menit
- Beban: 4-0.1N
- Gerak maju mundur mengkikis: 7 – 9 mm
- Counter Digit : 6 Digit
- Sudut pin sampel : 10°
- Radius pin baja: 0,25 mm ± 0,02 mm
- Kecepatan mengkikis: 20 mm/s ± 5 mm/s
- Sesuai Standar : SNI IEC60884-1 Figure 28
Lateral strain device
Selama pengujian perangkat tidak akan menjadi terlepas dari socket-outlet.Setelah tes, soket-outlet harus menunjukkan tidak ada kerusakan dalam arti standar ini;
| Model | : TKF13-C13.14 |
| Suplai daya | : - |
| Kategori | : Alat uji tusuk kontak (Plug & Socket) |
| Dimensi(mm) | : 300 x 10 x 500 |
| Berat (Kg) | : 25 ~ 30 Kg |
| Produk/sample uji | : Kontak kontak (Socket-outlet) |
| Sesuai standar | : SNI IEC 60884-1, Figure 13, Clause 13.14, (Gambar 13, klausul 13.14) |
Heat compression tester
| Model | : |
| Suplai daya | : AC 220V, 50Hz |
| Kategori | : Alat uji..... |
| Dimensi(mm) | : x x |
| Berat (Kg) | : 0 ~ 0 Kg |
| Produk/sample uji | : |
| Sesuai standar | : SNI IEC |
Glow wire test apparatus
| Model | : |
| Suplai daya | : AC 220V, 50Hz |
| Kategori | : Alat uji..... |
| Dimensi(mm) | : x x |
| Berat (Kg) | : 0 ~ 0 Kg |
| Produk/sample uji | : |
| Sesuai standar | : SNI IEC |
