Low Impact Fall Tester

Menguji ketahanan plug/steker terhadap tumbukan yang di berikan pada sampel uji. Hasil uji harus menunjukan tidak adanya kerusakan

Model: UT-001
Deimensi: 300 x 150 x 450
Sampel uji: plug/steker
Sesuai standar: SNI IEC 60884-1, gambar 27

---

The specimens are subjected to an impact test by means of an apparatus as shown in figure 27. The apparatus, positioned on a pad of sponge rubber 40 mm thick, is placed together with the specimens in a freezer at a temperature of (–15 ± 2) °C, for at least 16 h. At the end of this period, each specimen, in turn, is placed in the normal position of use as shown in figure 27, and a weight is allowed to fall from a height of 100 mm. The mass of the falling weight is (1 000 ± 2) g. After the test, the specimen shall show no damage within the meaning of this standard

---

Read More

Heat resistance tester

Aplikasi:
Untuk menguji ketahana isolasi pin terhadap panas yang tidak normal.

Model	: PS-003
Suplai daya	: AC 220V, 50Hz
Kategori	: Alat uji tusuk kontak
Dimensi(mm)	: 400 x 400 x 400
Berat (Kg)	: 20 ~ 25 Kg
Produk/sample uji	: Pin isolasi, steker, plug, dll
Sesuai standar	: SNI IEC 60884-1 gambar 40

---

Order
To determine testing resistance to abnormal heat of insulating sleeves of plug pins, in according to IEC 60884-1 figure 40, This test apparatus consists of an insulating plate A and of a metal part B: between these two parts an air space of 3 mm shall be provided and this distance shall be obtained through means which do not impair the air circulation around the pins.

Standard Outfit:

• 1 insulating plate A, which round and flat, thick 5 mm, have a diameter equal to twice the maximum permissible dimension of the engagement face of the plug given in the relevant standard sheet, 
• 5 metal part B, brass, length at least 20 mm, the same shape as the maximum outline of the plug according to the relevant standard sheet, 
• 1 thermocouple, type K, is inserted at a distance of 7 mm from the front surface of the metal part B in a symmetrical position 
• Insulation board : 5 mm thick round flat surface, diameter twice test diameter surface of the product. 
• Metal part B (Fixture): length of more than 20 mm, Material Brass, five pieces, can be replaced. 
• Gap between the boards of insulation and metal B : 3 mm, 
• The distance between the metal thermocouples & B: 7 mm 
• Metal bolt hole B : more than 0.1 mm

---

Read More

Encourage torque device

Aplikasi:
Untuk menguji ketahanan terhadap torsi dari sebuah peralatan listrik yang terdapat kabel fleksibel dengan diameter sampai dengan 10 mm yang tidak dapat dikawati ulang.

Model	:
Suplai daya	: -
Kategori	: Kabel, plug & soket
Dimensi(mm)	: 630 x 120 x 180
Berat (Kg)	: 8 ~ 14 Kg
Produk/sample uji	: Kabel fleksibel
Sesuai standar	: SNI IEC60884-1 klausul 23.2 ( table 18),   SNI IEC60335-1 klausul 25.15. (table 12 )

Read More

Heat compression tester

Aplikasi:

Model	:
Suplai daya	: AC 220V, 50Hz
Kategori	: Alat uji.....
Dimensi(mm)	: x x
Berat (Kg)	: 0 ~ 0 Kg
Produk/sample uji	:
Sesuai standar	: SNI IEC

Read More

Enchorage Torque Balance

Aplikasi:
Untuk mengukur dan menguji ketegangan torsi yang diberikan oleh peralatan listrik seperti plug/steker. Dilengkapi dengan socket-outlet sebagai pin konektor. sesuai dengan IEC60065 klausul 15.4.1 dan angka 11, IEC60335-1 klausul 22.3, IEC60884-1 ayat 14.23.2.

ORDER SEKARANG

Model	: DCT-043
Suplai daya	: -
Kategori	: Plug & Soker
Dimensi(mm)	:
Berat (Kg)	: 6 ~ 0 Kg
Produk/sample uji	:
Sesuai standar	: IEC60884-1 klausul 14.23.2,   IEC60335-1 klausul 22.3,   IEC60065 klausul 15.4.1

Read More