Burning Test Machine

Menentukan tingkat proteksi sampel terhadap pembakaran linear/nyala api, bara api dan percikan api yang dapat merusak spesimen. a - alatuji-sni.com.

Berbagai produk alat uji lokal

Kami merancang dan mendisain alat uji sesuai dengan standar SNI, IEC, ISO, EN, ASTM,CPSC, dll - alatuji-sni.com.

Switch Test Apparatus

Menguji daya tahan untuk switch tombol dan switch push(tekan),Menilai apakah switch mampu bertahan dalam penggunaan normal dari kerusakan mekanis - alatuji-sni.com.

Lokal Produk Indonesia

Menguji perlindungan/tingkat proteksi suatu produk terhadap tetesan, seprotan, semburan air sesuai dengan angka karakteristik proteksi(Index Protection) - alatuji-sni.com.

Penjualan alat uji

Berbagai macam alat uji kami produksi dan rancang untuk memenuhi laboratorium uji anda - alatuji-sni.com

On Off Timer

Aplikasi:
Menguji sirkuit terhadap kondisi hidup dan mati sesuai dengan interval yang telah ditentukan. kondisi hidup dan mati dapat di setting susuai dengan standar yang ditetukan.
Model : GT-S03
Sumber daya: AC220V, 50Hz
Dimensi (mm): 350 x400 x 350
Tipe produk: Alat uji/mesin uji umum
Subyek uji: Semua alat yang harus di uji terhadap kondisi hidup nati. Seperti lampu luminer, dsb.
Sesuai standar: SNI IEC 60598-1


Circuit for testing the thermal resistance from the die to the life cycle of the luminaire series that will lead down to the terminal voltage test.


  • Input Voltage   220V, 50Hz
  • Dimension  300X250X500 (millimeter)
  • Weight  Approx. 15 Kg
  • Digital Counter &  Timer with 4 Digit
  • With buzzer for signal after the test completed
  • 3 Output  terminal for connected the sample test
  • Safety with emergency button to break operation




Share:

Adjustable device

Mesin ini untuk menguji kekuatan luminer kabel fleksibel dari membungkuk dan meregangkan.

This machine for testing the strenght luminaries flexible cable from bending & flexing. According to SNI IEC 60598 Clause 4.14.3
Input Voltage
Dimension
Weight
Base Construction
Degree of angle rotation
Sample holder
Sample guide
Comfort to standard
: AC 220V, 50Hz
: 400 x 500 x 800 (millimeter)
: Approximately 45 Kg
: Stainless Steel
: 360°
: Clam with claw
: Pulley flexible
: SNI-IEC 60598-1
Share:

Ball impact tester

Aplikasi:

Model: 
Suplai daya: AC 220V, 50Hz
Kategori: Alat uji.....
Dimensi(mm): x x 
Berat (Kg): 0 ~ 0 Kg
Produk/sample uji: 
Sesuai standar: SNI IEC
                                                       
Share:

Heat resistance tester

Aplikasi:
Untuk menguji ketahana isolasi pin terhadap panas yang tidak normal.

Model: PS-003
Suplai daya: AC 220V, 50Hz
Kategori: Alat uji tusuk kontak
Dimensi(mm): 400 x 400 x 400
Berat (Kg): 20 ~ 25 Kg
Produk/sample uji: Pin isolasi, steker, plug, dll
Sesuai standar: SNI IEC 60884-1 gambar 40
                                                       

Order
To determine testing resistance to abnormal heat of insulating sleeves of plug pins, in according to IEC 60884-1 figure 40, This test apparatus consists of an insulating plate A and of a metal part B: between these two parts an air space of 3 mm shall be provided and this distance shall be obtained through means which do not impair the air circulation around the pins.

Standard Outfit:
  • 1 insulating plate A, which round and flat, thick 5 mm, have a diameter equal to twice the maximum permissible dimension of the engagement face of the plug given in the relevant standard sheet, 
  • 5 metal part B, brass, length at least 20 mm, the same shape as the maximum outline of the plug according to the relevant standard sheet, 
  • 1 thermocouple, type K, is inserted at a distance of 7 mm from the front surface of the metal part B in a symmetrical position 
  • Insulation board : 5 mm thick round flat surface, diameter twice test diameter surface of the product. 
  • Metal part B (Fixture): length of more than 20 mm, Material Brass, five pieces, can be replaced. 
  • Gap between the boards of insulation and metal B : 3 mm, 
  • The distance between the metal thermocouples & B: 7 mm 
  • Metal bolt hole B : more than 0.1 mm


Share:

Encourage torque device

Aplikasi:
Untuk menguji ketahanan terhadap torsi dari sebuah peralatan listrik yang terdapat kabel fleksibel dengan diameter sampai dengan 10 mm yang tidak dapat dikawati ulang.
Model:  
Suplai daya: -
Kategori: Kabel, plug & soket
Dimensi(mm): 630 x 120 x 180
Berat (Kg): 8 ~ 14 Kg
Produk/sample uji: Kabel fleksibel
Sesuai standar: SNI IEC60884-1 klausul 23.2 ( table 18),
  SNI IEC60335-1 klausul 25.15. (table 12 )
                                                       

Share:

IPX34 Test Machine

Aplikasi:
Menguji dan memeriksa perlindungan terhadap semprotan air untuk membuktikan tingkat proteksi produk/sampel uji sesuai dengan indek proteksi IPX3 dan IPX4 "Perlindungan terhadap semprotan Air " dan . " Perlindungan terhadap percikan air"

Model: WP-IPX34
Tipe: Alat uji umum/Universal Testing Machine
Sumber daya: AC 220V, 50Hz

Sampel uji:  Pompa, Outdor Air condioner. Lampu jalan, dsb.
Sesuai standard: SNI IEC 60529 gambar/figure 4, SNI IEC 60598 klausul/clause 9.2.5, SNI IEC 60947

alat uji sni - order sekarang


Checking the protection against water, to prove the degree of protection IPX3 and IPX4. for \”Protection against Spraying Water\” and \”Protection against Splashing Water\” tests. Oscillating tubes with spray nozzles of 0,4 mm Easy &adjustable Ring Stand for set up leveling the height Water flow rate for set the rate water supply into oscillating tube. With water filter to hold foreign material for drip nozzle. Turntable with adjustable speed Multiple of angle for rotation around sample up to 180 Speed for rotate around sample approximately 60 per second.

Share:

Pendulum Impact Tester

Pendulum Impact Tester - Alat Uji SNI
Aplikasi:
Menguji kekuatan samel uji terhadap tumbukan/benturan

Model: PIT-032
Suplai daya: -
Kategori: Uji kuat mekanis, uji tumbukan
Dimensi(mm): 
Berat (Kg): 0 ~ 0 Kg
Produk/sample uji: MCB, RCCB, Soket
Sesuai standar: SNI IEC 60884-1, Figures 22,23, 24 and 25
                                                       


The test apparatus consists basically of a pendulum rotating at its upper end in such a way as to be kept in a vertical plane. The axis of  the pivot is at 1000㎜ above the measuring point.

Pendulum Length :1000mm ,Impact
Height :100mm,150mm,200mm,250mm,400.
Material of Construction : Aluminum Profile
Impact Energy: low energy (not exceeding 1J) or high energy(2J and above).
Striking Element : equivalent mass: low energy:150g and 250g.
Striking Element : equivalent mass: height energy:500g.

Conforms to Standard : SNI IEC 60884-1, Figures 22,23, 24 and 25







Share:

Stroke Durability Tester

Aplikasi: 
Menguji kekuatan pasangan steker & soket (Plug & socket outlet) dari kerusakan dalam penggunaan yang normal.

It can provide the test of breaking volume of socket and outlet, and mechanical action of normal operation lifespan. Using pneumatic unit as motive power, power-on time and intermittent time can be adjusted.

Model : SDT-02
Power Supply : 220V 50Hz
Dimensi(mm) : 600 x 400 x 500
Berat (Kg) : 45 ~ 50Kg
Air source : 5 ~ 8 kg/cm2
Working station : 2 Station
Terminal Type : 2 pins & 3 Pins
Counter Display : 6 Digit
Sesuai standar : SNI IEC 60884-1 Figure 16  & Clause 20
Share:

Burning Test Machine

Aplikasi: Menentukan tingkat proteksi sampel terhadap pembakaran linear/nyala api, bara api & percikan api yang dapat merusak spesimen.
Model: FM-02
Suplai daya: AC 220V, 50Hz
Kategori: Flammability Tester
Dimensi(mm): 1100 X 600 X 800 mm
Berat (Kg): 75 ~ 90 Kg
Produk/sample uji: Plastik & material lain non logam
Sesuai standar: SNI ISO 845, ISO 9773
                                                       

It screening procedure for comparing the relative burning behavior specimens made from plastic and other non-metallic materials, exposed to a flame ignition source of 50W or 500W nominal power. These test methods determine the linear burning rate and the after flame/afterglow times, as well as the damaged length of specimens. They are applicable to solid and cellular materials that have an apparent density of not less than 250kg/m3, determined in accordance with ISO845. Then do not apply to materials that shrink away from the applied flame without ignition; ISO9773 should be used for thin flexible materials.
  • Timing device with four digit 9999X0.1s
  • Automatic Carried unit device for movement of needle
  • Smoke/fume exhaust Ø 113 mm incorporated in chamber
  • Black painted cabinet more than 0,5 m (2.05 m )
  • Gas flow regulating valve for flame height, manual adjustment
  • Gas pressure regulator and safety control
  • Needle burner tilt to 45° from the vertical, manual adjustment
  • Ring Stand easy to grip the sample
  • Preset time of testing; 5s, 10s, 20s, 30s, 60s, 120
  • Lighting inside the cabinet and fan control
  • Easy manual panel control with push button lamp
  • Timer Display for record data time burning, time flame
  • Time for temperature to increase (100° to 700°; 23,5 s)
  • Combustion angle 0 , 20 , 45
  • Height of flame Up to 125 mm
  • Gas Supply Propane min 95% purity


Share:

Mechanical shock tester

Aplikasi:

-Menguji & memastikan resistensi sampel terhadap mekanik shock
-Umumnya dipakai untuk menguji kuat mekanis dari RC32CB

Model: RC-A
Sumber daya: AC220V, 50Hz
Dimensi: 600 x 350 x 350
Sample Uji: RCCB

Sesuai standar: SNI IEC 61008-1 gambar 11

Share:

Test wire 1mm dan Test Probe 2,5mm



Model : IP-1 & IP 2.5
Suplai daya: : AC 220V, 50Hz
Kategori : Alat uji umum
Dimensi :
Berat : 0,2 Kg
Sampel uji : Umum
Sesuai standar : SNI IEC 61032 test probe D, SNI  IEC529 untuk IP4

Share:

Plug Flexing Machine

Aplikasi:

Model: 
Suplai daya: AC 220V, 50Hz
Kategori: Alat uji.....
Dimensi(mm): x x 
Berat (Kg): 0 ~ 0 Kg
Produk/sample uji: 
Sesuai standar: SNI IEC
                                                       
Order
Share:

Tracking Test Apparatus

Aplikasi:
- Untuk melakukan Comparative tracking Index (CTI)/Indeks pelacakan Perbandingan.
- Mensimulasikan pelacakan arus pada bahan isolasi padat dengan memberikan tetesan NH4Cl antara elektroda. Selama penggunaan normal bahan isolasi dapat terkena kelembaban dan kotoran, jika kotoran tersebut bersifat konduktif, dapat menyebabkan stress/tegangan dan dapat mengakibatkan bahaya kebakaran.


Model: TRX-029
Suplai daya: AC 220V, 50Hz
Kategori: Flammability test
Dimensi(mm): 600 x 500 x 650 
Berat (Kg): 30~50 Kg
Sample uji:  Bahan isolasi padat
Sesuai standar





: SNI IEC 60335-1, SNI IEC 60065,SNI IEC 61029, 
SNI IEC 60112, SNI IEC 61058-1, SNI  IEC 60669-1, 
SNI  IEC 60884-1, SNI IEC 60950-1, SNI IEC 60598-1, IEC 60320-1, IEC 60898-1, IEC 60400, IEC 60238, IEC 60730-1, ASTM D 3638,....etc.
                                                       

Comparative Tracking Index Test Apparatus is designed to carry out the comparative tracking index test described in IEC 60112. As per the standard, Tracking is “Progressive formation of conducting paths, which are produced on the surface and/or within a solid insulating material, due to the combined effects of electric stress and electrolytic contamination.” And Tracking Failure is “Failure of insulation due to tracking between conducting parts.”
The Comparative Tracking Index Test Apparatus provides a safe method to test insulators as per the standard. In this test, an insulator is subject to high voltage with the help of electrodes and a contaminant is dropped on the insulator between the electrodes. The comparative tracking index of the insulator is thus found out.

Spesifikasi tehnik:
Test Voltage                    : 100 to 600V AC, adjustable (Step Voltage 25VAC)
Trip Current                    : 0.5A  for 2 s
Voltage Indication            : 3 Digit Voltmeter, 0 to 600V
Current Indication           : 31/2 Digit Ammeter, 0 to 2.000A
Dropping Unit                 : Automatic by special positive displacement Pump
Drop Volume                  : 20mm³, (- 0/+ 5).  Mechanical, operated by knob.
Drop Times                     : 30s/drop
Drop Number Indication : Preset Digital Counter, 0 to 999999 drops
Dropping Height              : 40mm
Load on each electrode   : 1.0 Newton
Electrodes                       : Platinum

Share:

Categories

Sample Uji